Concept Guide

Parameter Description
USB modeswitch parameters
All the parameters that is required to be passed to the USB mode
switch utility.
Link Priority Ethernet
Set the priority of the wired uplink, from 0-255. Each uplink type has
an associated priority; wired ports having the highest priority by
default.
Link Priority Cellular
The priority of the cellular uplink, from 0-255. By default, the
cellular uplink is a lower priority than the wired uplink; making the
wired link the primary link and the cellular link the secondary or
backup link.
Cellular modem network preference
Multi-mode cellular modem network preference type.
Username of AP so that AP can
authenticate to 802.1X using PEAP
If your AP uses PEAP authentication, this field displays the AP
username.
Password of AP so that AP can
authenticate to 802.1X using PEAP
If your AP uses PEAP authentication, this field displays the AP
password.
Uplink VLAN
If you configured an uplink VLAN on an AP connected to a port in
trunk mode, the AP sends and receives frames tagged with this
VLAN on its Ethernet uplink.
By default, an AP has an uplink vlan of 0, which disables this
feature.
USB power mode
The USB power mode to control the power to the USB port.
AP POE Power optimization
Displays the AP POE power optimization status.
Usage Guidelines
The AP provisioning profile allows you to define a set of provisioning parameters to an AP group. These
settings can be saved or assigned to an AP group via the command ap-group <group> provisioning-profile
<profile>.
Related Commands
Command Description
provision-ap
Change provisioning parameters for an individual AP. This command does
not save the provisioning parameters settings in a reusable profile.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap provisioning-profile | 1245