Concept Guide

1083| show ap debug client-table Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Q - Static SM PS; N - A-MPDU disabled; B - TX STBC
b - RX STBC; M - Max A-MSDU; I - HT40 Intolerant
VHT Flags: C - 160MHz; c - 80MHz; V - Short GI 160; v - Short GI 80
E - Beamformee; e - Beamformer
HT_State shows client's original capabilities (not operational capabilities)
The output of this command includes the following information:
Parameter Description
MAC
MAC address of a client.
ESSID
Extended Service Set identifier (ESSID) used by the client. An ESSID is a user-defined
name for a wireless network.
BSSID
Basic Service Set identifier for the client.
Assoc_State
The associated state column shows whether or not the client is currently authorized
and/or associated with the AP.
HT_State
Shows information about the client’s high-throughput or very-high throughput
transmission type. The description for each of the flags that can appear in this column
follows the output of the command.
l A - LDPC Coding
l W - 40MHz
l S - Short GI 40
l s - Short GI 20
l D - Delayed BA
l G - Greenfield
l R - Dynamic SM PS
l Q - Static SM PS
l N - A-MPDU disabled
l B - TX STBC
l b - RX STBC
l M - Max A-MSDU
l I - HT40 Intolerant
l C - 160MHz
l c - 80MHz
l V - Short GI 16
l v - Short GI 80
l E - Beamformee
l e - Beamformer
AID
802.11 association ID. A client receives a unique 802.11 association ID when it
associates to an AP.
PS_State
Powersave state, showing if the APis in the awake or power-save state.