Service Manual

118 |Traps Dell Networking W-Series Instant Access Point 6.2.1.0-3.4 | MIB Reference Guide
wlsxMalformedFrameWrongChannelDetected
wlsxMalformedAuthFrame
wlsxCTSRateAnomaly
wlsxRTSRateAnomaly
wlsxNRogueAPDetected
Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber,
wlsxTrapAPLocation, wlsxTrapSourceMac, wlsxTrapTargetAPBSSID,
wlsxTrapTargetAPSSID, wlsxTrapTargetAPChannel, wlsxTrapAPChannel,
wlsxTrapSnr
Status current
Description This trap indicates that an AP detected a beacon on one channel advertising
another channel. This could be an attempt to lure clients away from a valid AP.
For more information check http://www.wve.org/entries/show/WVE-2006-0050
Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID,
wlsxTrapNodeMac, wlsxTrapSnr, wlsxTrapAPMacAddress,
wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel
Status current
Description This trap indicates that an AP detected an authentication frame with either a bad
algorithm (similar to Fata-Jack) or a bad transaction.
For more information check http://www.wve.org/entries/show/WVE-2006-0057
Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber,
wlsxTrapAPLocation, wlsxTrapAPChannel
Status current
Description This trap indicates that the rate of CTS packets received by an AP exceeds the
configured IDS threshold.
Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber,
wlsxTrapAPLocation, wlsxTrapAPChannel
Status current
Description This trap indicates that the rate of RTS packets received by an AP exceeds the
configured IDS threshold.
Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID,
wlsxTrapAPChannel
Status current
Description This trap indicates that an unauthorized access point is connected to the wired
network. The access point is classified as Rogue by the system.