Concept Guide

791| show aaa authentication dot1x Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Value
Maximum number of times Held State can be bypassed
Number of consecutive
authentication failures
which, when reached,
causes the controller to
not respond to
authentication requests
from a client while the
controller is in a held state
after the authentication
failure.
Dynamic WEP Key Message Retry Count
Number of times
unicast/multicast EAPOL
key messages are sent to
the client.
Dynamic WEP Key Size
Dynamic WEP key size,
either 40 or 128 bits.
Interval between WPA/WPA2 Key Messages
Interval, in milliseconds,
between each WPA key
exchange. The allowed
range of values is 1000-
5000 msecs, and the
default value is 1000
msecs.
Delay between EAP-Success and WPA2 Unicast Key Exchange
Show the delay interval
between EAP-Success and
unicast key exchanges, in
msec.
Range: 0-2000msec.
Default: 0 (no delay).
Delay between WPA/WPA2 Unicast Key and Group Key Exchange
Interval, in milliseconds,
between unicast and
multicast key exchanges.
Time interval after which the PMKSA will be deleted
Show the PMKSA cache
interval. Time interval in
Hours. Range: 1-2000.
Default: 8 hrs.
Delete Keycache upon user deletion Enabled
If enabled, the controller
deletes the key cache entry
when the user entry is
deleted.
WPA/WPA2 Key Message Retry Count
Number of times
WPA/WPA2 key messages
are retried.