Concept Guide

show port status
show port status
[<slot>/<module>/<port>]
Description
Displays the status of all ports on the controller.
Syntax
Parameter Description
<slot>/<module>/<port>
Physical port in <slot>/<module>/<port> format.
Example
The output of this command shows the status of all ports in the controller.
(host) # show port status
Port Status
-----------
Slot-Port PortType AdminState OperState PoE Trusted SpanningTree PortMode
--------- -------- ---------- --------- --- ------- ------------ --------
0/0/0 GE Enabled Up N/A Yes Forwarding Access
0/0/1 GE Enabled Down N/A Yes Disabled Access
0/0/2 GE Enabled Down N/A Yes Disabled Access
0/0/3 GE Enabled Down N/A Yes Disabled Access
0/0/4 GE Enabled Down N/A Yes Disabled Access
0/0/5 GE Enabled Down N/A Yes Disabled Access
Speed Duplex
----- ------
1 Gbps Full
Auto Auto
Auto Auto
Auto Auto
Auto Auto
Auto Auto
The output of this command includes the following parameters:
Parameter Description
SlotPort
Displays the physical port in <slot>/<module>/<port> format.
PortType
Displays the type of physical port.
l FE: Fast Ethernet
l GE: Gigabit Ethernet
l PC: Port Channel
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show port status | 1779