Concept Guide

show gateway health-check
show gateway health-check
Description
Display the current status of the gateway health-check feature.
Syntax
No parameters.
Usage Guidelines
The gateway health check feature can only be enabled by Dell Technical Support.
Example
This example below shows that the gateway health-check feature has not been enabled on the controller.
(host) #show gateway health-check
Gateway health check not enabled
Related Commands
Command Description Mode
gateway health-check disable
Disable the gateway health check Config mode
Command History
This command was introduced in ArubaOS 3.4.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on master or local controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show gateway health-check | 1499