Concept Guide

Parameter Description
lag table
Displays contents of the datapath link aggregation
group (LAG) or port channel table.
message-queue counters
Displays statistics of messages received by a CPU
from other datapath CPUs (only CPUs that receive
messages and non-zero statistics are shown).
maintenance counters
Displays datapath maintenance statistics.
mobility
Displays datapath IP mobility information.
discovery-table
Displays the discovery count table that is used to keep
track of per client home agent discovery.
home-agent-table
Displays the datapath HA table information.
mcast-table
Displays the mobility multicast-group table that is
used to flood the multicast RA traffic to the roamed
clients.
stats
Displays the statistics of the datapath mobility.
nat
Displays the contents of the datapath NAT entries
table. It displays NAT pools as configured in the
datapath. Statistics include pool, SITP start, SIP end
and DIP.
network ingress
Displays ingress queue counters.
ap-name <ap-name>
Name of AP.
counters
Nat counters.
ip-addr <ip-address>
IP address of the AP.
nexthop-list
Displays the following types of information about the
dapath for packets routed to next-hop devices.
l SOS Dest : Unique datapath identifier for each
next-hop list
l Active IP:
l NhIdx: Unique identifier for each next-hop list
l NhVer: Internally generated number used to
synchronize the next-hop and session tables.
papi
Displays datapath papi counters including: SUM/CPU,
addr, description, and value.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show datapath | 1438