Reference Guide

558 | wlan ssid-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
Command/Parameter Description Range Default
operator is available only if the
mac-address-and-dhcp-
options attribute is selected in
the Attribute drop-down.
termination
Configures the EAP portion of
802.1X authentication on the W-
IAP, instead of the RADIUS server.
When enabled, this command
reduces network traffic to the
external RADIUS server by
terminating the authorization
protocol on the W-IAP. By default,
for 802.1X authorization, the client
conducts an EAP exchange with
the RADIUS server, and the W-IAP
acts as a relay for this exchange.
The W-IAP by itself acts as an
authentication server and
terminates the outer layers of the
EAP protocol, only relaying the
innermost layer to the external
RADIUS server.
— Disabled
type {employee|voice|guest}
Configures the type of network
such as employee, voice, guest
network.
— —
vlan <vlan>
Allows the administrators to assign
a VLAN to the SSID users.
1...4095 —
wep-key <wep-key>
Static WEP key associated with the
key index. The WEP key values
can be 10 or 26 hexadecimal
characters in length.
— —
wispr
Enables WISPr authentication for
the SSID profile.
— —
wmm-background-dscp <dscp>
Allows you to specify the DSCP
mapping value for the background
traffic.
0—63 —
wmm-background-share <share>
Allocates bandwidth for
background traffic such as file
downloads or print jobs.
— —
wmm-best-effort-dscp <dscp>
Allows you to specify the DSCP
mapping value for the best effort
traffic.
0—63 —
wmm-best-effort-share <share>
Allocates bandwidth or best effort
traffic such as traffic from legacy
devices or traffic from applications
or devices that do not support QoS.
— —