Reference Guide

470 | show upgrade info Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
show upgrade info
show upgrade info
Description
This command displays the image upgrade details for a W-IAP.
Usage Guidelines
Use this command to view the image upgrade details for a W-IAP.
Example
The following example shows the output of show upgrade info command:
Image Upgrade Progress
----------------------
Mac IP Address AP Class Status Image Info Error Detail
--- ---------- -------- ------ ---------- ------------
d8:c7:c8:cb:d4:20 10.17.88.188 Cassiopeia image-ok image file none
Auto reboot :enable
Use external URL :disable
The output of this command provides the following information:
Parameter Description
Mac
Shows the MAC address of the W-IAP.
IP Address
Shows the IP address of the W-IAP.
AP Image Class
Indicates the W-IAP class. The following examples describe the image class
for different W-IAP models:
l For W-IAP 135/134 —DellInstant_Cassiopeia_<build-version>
l For W-IAP108/109, W-IAP103, and W-IAP114/115— DellInstant_Pegasus_
<build-version>
l For W-IAP155/155P—DellInstant_Aries_<build-version>
l For W-IAP224/225 and W-IAP274/275—DellInstant_Centaurus_<build-
version>
l For all other W-IAPs —DellInstant_Orion_<build-version>
Status
Indicate the current status of the image upgrade.
Image Info
Indicates the source of image.
Error Detail
Displays errors generated when an upgrade fails.
Auto Reboot
Indicates if automatic rebooting of W-IAP is enabled on a successful upgrade.
Use External URL
Indicates if an external URL can be used for loading an image file.
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.