Reference Guide

show ids
show ids {ap <mac>| aps| client <mac>|clients| phy-types| rap-types}
Description
This command displays the list of unknown APs and clients detected by the W-IAP with the IDSfeature enabled.
Syntax
Parameter Description
ap <mac>
Displays the signal details for the W-IAP.
aps
Displays the unknown Access Points detected by the W-IAP.
client <mac>
Displays the details of the W-IAP to which the client is connected.
clients
Displays the list of unknown clients detected by the W-IAP.
phy-types
Displays the PHY details of the W-IAP.
rap-types
Displays the list of Remote APs (W-IAPs) detected by the W-IAP.
Usage Guidelines
Use this command to view the intrusion detection details.
Examples
The following output is displayed for the show ids aps command:
Unknown Access Points Detected
------------------------------
MAC Address Network Classification Chan. Type Last Seen
----------- ------- -------------- ----- ---- ---------
6c:f3:7f:56:6d:01 NTT-SPOT Interfering 1 G 17:32:19
6c:f3:7f:56:67:41 NTT-SPOT Interfering 1 G 17:37:49
00:24:6c:2a:78:d2 edward-suiteb-178 Interfering 11 GN 20MZ 17:37:19
6c:f3:7f:94:63:30 avyas_vap1 Interfering 6 G 17:40:20
6c:f3:7f:94:63:02 avyas_vap2 Interfering 6 G 17:40:20
00:24:6c:2a:7d:0b edward-suiteb Interfering 149 AN 40MZ 17:39:19
6c:f3:7f:a5:df:34 sw-san-rapng-nat Interfering 153 AN 20MZ 17:38:49
6c:f3:7f:56:7d:00 7SPOT Interfering 1 GN 20MZ 17:32:19
00:24:6c:80:8e:82 instant Interfering 11 GN 20MZ 17:29:48
00:1a:1e:40:06:00 test123 Interfering 11 G 17:37:49
00:24:6c:2a:78:d3 ssid_edward_psk_178 Interfering 11 GN 20MZ 17:37:49
6c:f3:7f:94:63:31 avyas_vap2 Interfering 6 G 17:40:20
6c:f3:7f:b5:bd:22 iClarice2 Interfering 6 GN 20MZ 17:39:19
6c:f3:7f:94:63:03 avyas_vap1 Interfering 6 G 17:40:20
00:24:6c:2a:7d:0c edward_tls2k Interfering 149 AN 40MZ 17:39:19
6c:f3:7f:a5:df:35 sw-san-native Interfering 153 AN 20MZ 17:38:49
00:24:6c:80:4f:88 ethersphere-wpa2 Interfering 52 AN 40MZ 17:40:20
The show ids aps command output provides information on the MAC address of interfering W-IAPs, the network to
which the unknown W-IAPs are connected, the interference classification, channels on which the unknown APs are
detected, the radio configuration type and recent timestamp of the interference.
The following output is displayed for the show ids clients command:
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show ids | 379