Reference Guide

282 | show ap debug system-status Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
show ap debug system-status
show ap debug system-status
Description
This command displays the detailed system configuration information for a W-IAP.
Usage Guidelines
Use this command under the guidance of Dell technical support to troubleshoot network issues. The output of this
command displays the following types of information if any for the selected W-IAP:
l Bootstrap information l Per-radio statistics l Ethernet duplex/speed settings
l Descriptor Usage l Encryption statistics l Tunnel heartbeat stats
l Interface counters l AP uptime l Boot version
l MTU discovery l memory usage l LMS information
l ARP cache l Kernel slab statistics l Power status
l Route table l Interrupts l CPU type
l Interface Information l Crash Information l CPU usage statistics
Command History
Version Description
Dell Networking W-Series
Instant 6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode