Manualshelf

Reference Guide

ManualsBrandsDell ManualsAccess PlatformsW-IAP104/105
271272273274275276277278279280
280 | show ap debug spanning-tree Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
show ap debug spanning-tree
show ap debug spanning-tree
Description
This command displays the Spanning Tree Protocol (STP) information for a W-IAP.
Usage Guidelines
Use this command to view STP details on a W-IAP. STP is enabled for a wired port profile to ensure that there are no
loops in any bridged Ethernet network. STP operates on all downlink ports, regardless of forwarding mode. STP will
not operate on the uplink port and is supported only on W-IAPs with three or more ports.
Example
The following example shows the output displayed for the show ap debug spanning-tree command when there are
no STP devices found:
stpdev: can't get info No such device
Command History
Version Description
Dell Networking W-Series Instant 6.3.1.1-
4.0
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode