Reference Guide

rf-band
rf-band {2.4| 5.0| all}
Description
This command configures the radio frequency band for a W-IAP.
Syntax
Parameter Description Range Default
rf-band {2.4| 5.0|
all}
Configures a radio frequency band for a W-IAP.
You can configure any of the following options:
l 2.4 — For 2.4 GHz band or 802.11g
configuration
l 5 — For 5 GHz and 802.11a configuration
l all - For a mixed configuration of 2.4.GHz and 5
GHz. If you do not specify any value, by default
both 5 GHz and 2.4 GHz bands are selected.
2.4, 5.0, all all
Usage Guidelines
Use this command to configure RF band for a W-IAP.
Example
The following example configures the 5 GHz RF band for a W-IAP.
(Instant AP)(config)# rf-band 5.0
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide rf-band | 181