Concept Guide

Table Of Contents
1044| show ap-crash-transfer Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
show ap-crash-transfer
show ap-crash-transfer
Description
This command displays info for the AP crash transfer feature, which transfers AP coredump files to the
controller flash memory if no dumpserver is configured.
Syntax
No Parameters
Usage Guidelines
The command ap system-profile <profile> dump-server <server> specifies a server to receive a core
dump generated when an AP process crashes. If no dump server is configured, issue the ap-crash-transfer
command to save dump files to the controller flash memory.
If you define a dump server and issue the ap-crash-server command, the dump server configuration takes
precedence, and coredump files are sent to the dump server.
Example
(host)) #show ap-crash-transfer
AP Crash Transfer:enabled
AP Crash folder limit:50 MB (non-editable)
Related Commands
Command Description
ap-crash-transfer
This command allows AP coredump files to be transferred he
controller flash memory if no dumpserver is configured.
Command History
Release Modification
ArubaOS 6.4 This command is introduced.
Command Information
Platforms Licensing Mode
All platforms Base operating system Enable or
Config mode
on master and
local
controllers.