Users Guide
Table Of Contents
- Contents
- About This Guide
- Initial Configuration
- Dell W-Instant User Interface
- Wireless Network
- Managing W-IAPs
- Preferred Band
- Auto Join Mode
- Terminal Access
- LED Display
- TFTP Dump Server
- Extended SSID
- Deny Inter User Bridging and Deny Local Routing
- Syslog Server
- Adding a W-IAP to the Network
- Removing a W-IAP from the Network
- Editing W-IAP Settings
- Rebooting the W-IAP
- Firmware Image Server in Cloud Network
- Layer-3 Mobility
- Spectrum Monitor
- Time Management
- Virtual Controller
- Authentication
- Authentication Methods in Dell W-Instant
- 802.1X Authentication
- Authentication Survivability
- Captive Portal
- Internal Captive Portal
- External Captive Portal
- External Captive Portal Authentication using ClearPass Guest
- WISPr Authentication
- MAC Authentication
- Walled Garden Access
- MAC + 802.1X Authentication
- MAC + Captive Portal Authentication
- Wired Authentication on a W-IAP
- Certificates
- Encryption
- Role Derivation
- User VLAN Derivation
- Instant Firewall
- Content Filtering
- OS Fingerprinting
- Adaptive Radio Management
- Intrusion Detection System
- SNMP
- Ethernet Downlink
- Hierarchical Deployment
- Uplink Configuration
- Dell PowerConnect W-AirWave Integration and Management
- AirGroup
- Introducing AirGroup
- What is Bonjour and Zero Configuration Networking?
- WLANs and Bonjour
- AirGroup Solution
- AirGroup Features
- AirGroup Architecture
- The AirGroup Solution Components
- Configuring AirGroup on W-Instant
- Configuring AirGroup-CPPM Interface in W-Instant
- AirGroup Monitoring
- Troubleshooting and Log Messages
- Monitoring
- Alert Types and Management
- Policy Enforcement Firewall
- VPN Configuration
- User Database
- Regulatory Domain
- Controller Configuration for VPN
- Dell PowerConnect W-ClearPass Configuration for AirGroup
- IAP-VPN
- Troubleshooting
- Abbreviations
Access Points Tab
If the Auto Join Mode feature is enabled, a list of enabled and active W-IAPs in the DellW-
Instant network is displayed in the Access Points tab. The W-IAP names are displayed as links.
If the Auto Join Mode feature is disabled, a New link appears. Click on this link to add a new W-
IAP to the network. If aW-IAP is configured and not active, its MAC Address is displayed in red.
The expanded view displays the following information about each W-IAP:
l Name— Name of the access point.
l IP Address— IP address of the W-IAP.
l Mode— Mode of the W-IAP.
n Access— In this mode, the AP serves clients and scans the home channel for spectrum
analysis while monitoring channels for rogue APs in the background
n Monitor — In this mode, the AP acts as a dedicated Air Monitor (AM), scanning all
channels for rogue APs and Clients.
l Spectrum— When enabled, the AP functions as a dedicated full-spectrum RF monitor,
scanning all channels to detect interference, whether from neighboring APs or from non Wi-Fi
devices such as microwaves and cordless phones. When Spectrum is enabled, the AP does not
provide access services to clients.
l Clients— Number of clients that are connected to the W-IAP.
l Type— Model number of the W-IAP.
l Channel— Channel the W-IAP is currently broadcasting on.
l Power (dB)— Maximum transmit EIRP of the radio.
l Utilization (%)— Percentage of time that the channel is utilized.
l Noise (dBm)— Noise floor of the channel.
An edit link appears on clicking the W-IAP name. For details about editing W-IAP settings see
"Editing W-IAP Settings" on page 75.
Figure 7 - Access Points Tab— Compressed View and Expanded View
Clients Tab
This tab displays a list of clients that are connected to the DellW-Instant network. The client
names appear as links. The expanded view displays the following information about each client:
l Name— User name of the client or guest users if available.
l IP Address— IP address of the client.
l MAC Address— MAC address of the client.
Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide 25 | DellW-Instant User Interface