Concept Guide

30 | Setting Up and Tuning VisualRF Dell PowerConnect W AirWave 7.2 | VisualRF User Guide
This view is focused on providing insight into the RF environment of an entire floor as follows:
 Users - all users associated with all access points on this floor
 APs - all access points on this floor
 Radios - all radios for all access points on this floor are displayed
 Rogues - all rogues are off
 Heatmaps - all are off by default
 Client/Rogue Surveys - all surveys are off
 Walls - all walls are displayed
 Lines - client to AP of association
 Labels - all labels are disabled
Viewing a Network, Campus, Building View’s RF Environment
To view floors from a geographical perspective:
1. Navigate to the VisualRF > Floor Plans page.
2. This will launch the visual QuickView navigation system as shown in Figure 29. Click on each network,
campus, or building successively to drill down further until you reach the floor plan.
Figure 29 Floor Plan View
This navigation provides information in each view as follows:
 Network View - contains all campuses within your WLAN
 Campus View - all buildings within a campus
 Building View - all floors within a building
 Floor Plan View - all devices access points, clients, and rogues within the floor
Viewing Campuses, Buildings, or Floors from a Tree View
As an alternative to using QuickView, you can use the Tree View to view floors from a hierarchical tree, as follows:
1. Navigate to the VisualRF > Floor Plans page.
2. Select the Tree icon ( )at the bottom right of any view. The Network Tree View window, shown in Figure
30, appears on the screen.