Users Guide

Parameter Description
Description (Optional) Use this field to add a brief description of the campus AP.
Remote AP whitelist configuration parameters
AP MAC Address MAC address of the remote AP, in colon-separated octets.
User Name Name of the end user who provisions and uses the remote AP.
AP Group Select the name of the AP group to which the remote AP is assigned.
AP Name (Optional) Name of the remote AP. If you not specify a name, the AP uses its MAC
address as a name.
Description (Optional) A brief description to help you identify the AP
IP-Address The static inner IP address to be assigned to the remote APs.
7. Click Add to add the information to the whitelist.
8. Click Apply to save your changes.
To add an AP to the Campus AP whitelist via the command-line interface, issue the command
whitelist-db cpsec add mac-address <macaddr> description <description>
To add an AP to the Remote AP whitelist via the command-line interface, issue the command
whitelist-db rap add mac-address <macaddr> ap-group <ap-group> [ap-name <ap-name>]
[description <description>] [full-name <name>] remote-ip <inner-ip-adr>
Viewing Whitelist Status
The WebUI can display either a table of entries in the selected whitelist, or a general nstatus summary for that
whitelist. The whitelist status pages show the current status each entry in the whitelist, and, for Dell controllers in a
master/local controller topology, information for whitelist synchronization between Dell controllers. This information
is updated automatically as the status of each entry changes.
By default, the Wireless > AP Installation > Whitelist tab displays status information for the campus AP
Whitelist. To view status information for entries in the remote AP whitelist, click the blue Remote AP link on this
tab.
The following table describes the status information types available on the Whitelist status page.
Status Entry Description
Control Plane Security
(Campus AP Whitelist status only)
The Campus AP whitelist status page shows if control plane security has been
enabled or disabled on the controller. This status entry is also a link to the control
plane security configuration tab.
Number of Entries Total number of entries in the selected whitelist.
Approved Entries Number of entries that have been approved by the controller.
Unapproved Entries Number of entries that have not been approved by the controller
Table 15: Whitelist status information
Dell PowerConnect W-Series ArubaOS 6.2 | User Guide Control Plane Security | 83