Reference Guide

760 | show datapath Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
Syntax
Parameter Description
acl id <id-name> Displays datapath statistics associated with a specified ACL. The ACL index is found in the
show rights command.
ap-name <ap-name> Name of the AP.
ip-addr <ip-address> IP address of the AP
application counters Shows application counters and errors generated by applications running on a particular
AP. These include stateful firewall application layer statistics.
ap-name <ap-name> Name of the AP.
ip-addr <ip-address> IP address of the AP.
bridge Shows bridge table entry statistics including MAC address, VLAN, assigned VLAN,
Destination and flag information for an AP.
ap-name <ap-name> Name of the AP. Shows MAC address, VLAN, assigned VLANs, destination and flags
information.
counters Shows datapath bridge table statistics such as current entries, high water mark, maximum
entries, total entries, allocation failures and max link length.
ip-addr <ip-address> IP address of the AP. Shows MAC address, VLAN, assigned VLANs, destination and flags
information.
table <macaddr> Displays the current high, maximum, and total number of bridge table entries for the Dell
controller.
bwm table Shows bandwidth management table entry statistics such as CPU, contract, Bits/sec,
policed, available bytes, queued bytes and packets.
crypto counters Displays crypto parameter statistics including crypto, IPSEC, PPTP, WEP, TKIP, AESCCM,
WEP CRC, crypto hardware , XSEC, DOT1X and L2TP information.
debug Displays datapath debug details. These are low-level datapath details.
dma counters DMA counters are displayed.
trace-buffers Debug trace-buffer tables are displayed.
esi table Displays the contents of the datapath ESI server table entries including server, IP, MAC,
destination, VLAN, type, session and flag information.
frame counters Displays frame statistics that are received and transmitted from the datapath of the
controller.
ap-name <ap-name> Name of the AP.
ip-addr <ip-address> IP address of the AP.
hardware Displays datapath hardware counters and hardware packet statistics information.
counters Hardware counters.
statistics Hardware packet statistics.
ip-reassembly Displays the contents of the IP Reassembly statistics table.
ap-name <ap-name> Name of the AP.
counters IP reassembly counters.
ip-addr <ip-address> IP address of the AP
lag table Displays contents of the datapath link aggregation group (LAG) or port channel table.