Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide ap-name | 124
Usage Guidelines
Profiles that are applied to an AP group can be overridden on a per-AP name basis, and virtual APs can be added
or excluded on a per-AP name basis. If a particular profile is overridden for an AP, all parameters from the
overriding profile are used. There is no merging of individual parameters between the AP and the AP group to
which the AP belongs.
Example
The following command excludes a virtual AP profile from a specific AP:
(host) (config) #ap-name 00:0b:86:c0:cf:d8
exclude-virtual-ap corpnet
Related Commands
View AP settings using the command show ap-name.
Command History:
Command Information
virtual-ap One or more profiles, each of which configures a specified WLAN. See “wlan
virtual-ap” on page 1230.
“default”
voip-cac-profile Configures voice over IP (VoIP) call admission control (CAC) options. See “wlan
voip-cac-profile” on page 1236.
This parameter requires the PEFNG license.
“default”
wired-ap-profile Configures the ports for APs that are directly attached to the controller. See “ap
wipe out flash” on page 121.
“default”
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 3.2 Support for mesh parameters was introduced.
ArubaOS 3.4.1 License requirements changed in ArubaOS 3.4.1, so the voip-cac-profile parameter
required the PEF license instead of the Voice Services Module license required in earlier
versions.
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers
Parameter Description Default