Reference Guide

348 |Traps Dell PowerConnect ArubaOS 5.0 MIB | Reference Guide
wlsxTrapTargetAPSSID
wlsxTrapTargetAPChannel
wlsxTrapNodeMac
wlsxTrapSourceMac
wlsxReceiverMac
Syntax DisplayString(Size(0..64))
Max-Access accessible-for-notify
Status current
Description This object is used in the traps to indicate the SSID of the access point for which we are
raising the trap. If an air monitor is sending the trap, this will indicate AP. If an access point is
sending the trap, then it will point to itself.
Syntax Integer32
Max-Access accessible-for-notify
Status current
Description This object is used in the traps to indicate the channel of the access point for which we are
raising the trap. If an air monitor is sending the trap, this will indicate AP. If an access point is
sending the trap, then it will point to itself.
Syntax MacAddress
Max-Access accessible-for-notify
Status current
Description This object is used in the traps to indicate the MAC address of a node.
Syntax MacAddress
Max-Access accessible-for-notify
Status current
Description This object is used in the traps to indicate the MAC address of the source.
Syntax MacAddress
Max-Access accessible-for-notify
Status current
Description This object is used in the traps to indicate the MAC address of the receiver.