Reference Guide

2014-05-13 16:30:08 f8:f1:b6:03:0d:ff Band-steer Success/1 -35/-50/-50 -
35/-50/-50 21/21/21 2.4G/5G/5G
6c:f3:7f:e7:2d:40/6c:f3:7f:e7:2d:50/6c:f3:7f:e7:2d:50 ap225/ap225/ap225 jxie2/jxie2
The output of this command includes the following additional parameters:
Parameter Description
Eff_Signal (S/T/A)
The output of this column shows the following values:
l S: The relative received signal strength indicator (RSSI) of the source AP
radio. This value is derived from the transmit power of the source AP radio
and received power from the client.
l T: The relative RSSI of the target AP radio. This value is derived from the
transmit power of the target AP radio and received power from the client.
l A: The relative RSSI of the AP radio that the client is actually associated to.
This value is derived from the transmit power of the AP radio and received
power from the client.
EIRP (S/T/A)
The output of this column shows the following values:
l S: The amount of power transmitted from an antennae in the source AP
l T: The amount of power transmitted from an antennae in the target AP
l A: The amount of power transmitted from an antennae in the AP that the
client is actually associated to
Essid (S/A)
The output of this column shows the following values:
l S: The identifying name of the source wireless network
l A: The identifying name of the wireless network the client is actually
associated to
Related Commands
Use the following command to enable the client match feature:
l rf arm-profile client-match
The following commands display statistics for the client match feature:
l show ap arm client-match probe-report
l show ap arm client-match neighbors
l show ap arm client-match restriction-table
l show ap arm virtual-beacon-report
l show ap arm client-match unsupported
l show ap arm client-match summary
Dell Networking W-Series ArubaOS 6.4.x | User Guide show ap arm client-match history | 972