Reference Guide

show acl hits
show acl hits
Description
Show internal ACL hit counters.
Syntax
No parameters.
Usage Guidelines
Issue this command to see the number of times an access control list defined a user’s role, or traffic and firewall
policies for a user session.
Example
In the example below, the output of the User Role ACL Hits table is shown in two separate tables to allow the
output to fit on a single page of this document. In the actual controller command-line interface, the User Role
ACL Hits table is shown in a single, wide table.
(host) #show acl ace-table acl 1
User Role ACL Hits
------------------
Role Policy Src Dst
---- ------ --- ---
logon control any any
logon control any any
logon any any
visitor vp-control any any
visitor vp-control any any
visitor vp-access any any
visitor vp-access user mswitch-master
visitor vp-access any any
User Role ACL Hits------------------
Service Action Dest/Opcode New Hits Total Hits Index
------- ------ ----------- -------- ---------- -----
svc-icmp permit 0 6 5052
svc-dhcp permit 0 2 5057
0 deny 0 53 5069
svc-dns permit 9 46079 4885
svc-dhcp permit 0 788 4886
svc-icmp permit 0 536 4887
svc-http permit 0 41 4889
6 9100-9100 permit 0 31 4892
Port Based Session ACL
----------------------
Policy Src Dst Service Action Dest/Opcode New Hits Total Hits
Index
------ --- --- ------- ------ ----------- -------- ---------- --
---
validuser 10.1.1.0 255.255.255.0 any any deny 0 214
4655
validuser any any any permit 6 2502
4656
Port ACL Hits
Dell Networking W-Series ArubaOS 6.4.x | User Guide show acl hits | 912