Reference Guide

Parameter Description
Configured destinations Number of destinations configured using the netdestination
command.
Configured services Number of service aliases configured using the netservice
command.
Configured Auth servers Number of configured authentication servers.
Auth server in service Number of authentication servers currently in service.
Radius server timeouts Number of times the RADIUS server did not respond to the
authentication request.
Web Total number of captive portal authentications or authentication
failures since the last controller reset.
MAC Total number of MAC authentications or authentication failures since
the last controller reset.
VPN Total number of VPN authentications or authentication failures since
the last controller reset.
802.1x Total number of 802.1X authentications or authentication failures
since the last controller reset.
Krb Total number of Kerberos authentications or authentication failures
since the last controller reset.
RadAcct Total number of RADIUS accounting verifications or accounting
failures since the last controller reset.
SecureID Number of authentication verifications or failures using methods
which use one-time passwords. (For example, EAP-GTC being used
as the inner EAP protocol of EAP-PEAP.)
Stateful-802.1x Total number of Stateful 802.1X authentications or authentication
failures since the last controller reset.
Management Total number of Management user authentications or authentication
failures since the last controller reset.
Idled users Total number of users that are not broadcasting data to an AP.
Mobility Shows whether the IP mobility feature has been enabled or disabled
on the controller.
Dell Networking W-Series ArubaOS 6.4.x | User Guide show aaa state configuration | 888