Reference Guide

633 | loginsession Dell Networking W-Series ArubaOS 6.4.x| User Guide
loginsession
loginsession timeout <minutes>
Description
This command configures the time management session (via Telnet or SSH) remains active without user
activity.
Syntax
Parameter Description Range Default
timeout
Number of seconds or minutes that a
management session remains active
without any user activity.
5-60 minutes or 1-
3600 seconds, 0 to
disable
15 minutes
Usage Guidelines
The management user must re-login to the controller after a Telnet or SSH session times out. If you set the
timeout value to 0, sessions do not time out. The TCP session timeout for wireless and wired user sessions
through the controller is 15 minutes; this timeout for user sessions is not configurable.
Example:
The following command configures management sessions on the controller to not time out:
(host) (config) #loginsession timeout 0
Command History
This command was available in ArubaOS 3.0
Command Information
Platform License Command Mode
Available on all platforms Requires the PEFNG license Config mode on
master controllers