Reference Guide

Parameter Description Range Default
timeout <seconds>
Maximum time, in
seconds, that the
controller waits
before timing out the
request and
resending it.
1-30 5
second
s
use-ip-for-calling-station
Use an IP address
instead of a MAC
address for calling sta-
tion IDs. This option is
disabled by default.
— disable
d
use-md5
Use MD5 hash of
cleartext password.
— disable
d
Usage Guidelines
You configure a server before you can add it to one or more server groups. You create a server group for a
specific type of authentication (see aaa server-group on page 125).
Example
The following command configures and enables a RADIUS server:
aaa authentication-server radius radius1
host 10.1.1.244
key qwERtyuIOp
enable
Command History
Version Modification
ArubaOS 3.0 Command introduced.
ArubaOS 6.0 RADIUS server can be identified by its qualified domain name (FQDN).
ArubaOS 6.1 The source-interface parameter was added.
ArubaOS 6.3 l The mac-delimiter parameter was introduced.
l The enable-ipv6 and nas-ip6 parameters were introduced. An IPv6
host address can be specified for the host parameter.
l The ipv6 addr parameter was added.
Dell Networking W-Series ArubaOS 6.4.x | User Guide aaa authentication-server radius | 62