Reference Guide

479 | interface-profile voip-profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
interface-profile voip-profile
interface-profile voip-profile <profile-name>
clone <source>
no{...}
voip-dot1p <priority>
voip-dscp <value>
voip-mode [auto-discover | static]
voip-vlan <VLAN-ID>
Description
This command creates a VoIP profile that can be applied to any interface or an interface group.
Syntax
Parameter Description Range Default
<profile-name>
Name of the VoIP profile. 1-32 char-
acters; can-
not begin
with a
numeric
character
—
voip-dot1p <priority>
Specifies the dot1p priority.
— —
voip-dscp <value>
Specifies the DSCP value for the
voice VLAN
— —
voip-mode [auto-discover | static]
Specifies the mode of VoIP operation.
l auto-discover - Operates VoIP
on auto discovery mode.
l static - Operates VoIP on static
mode.
— static
voip-vlan <vlan id>
Specifies the Voice VLAN ID. — —
Usage Guidelines
Use this command to create VoIP VLANs for VoIP phones. Creating a VoIP profile does not apply the
configuration to any interface or interface group. To apply the VoIP profile, use the interface
gigabitethernet and interface-group commands.
Example
The following command configures a VoIP profile:
interface-profile voip-profile VoIP_PHONES
voip-dot1p 100
voip-dscp 125
voip-mode auto-discover
voip-vlan 126