Reference Guide

269 | audit-trail Dell Networking W-Series ArubaOS 6.4.x| User Guide
audit-trail
audit-trail [all]
Description
This command enables an audit trail.
Syntax
Parameter Description
all
Enables audit trail for all commands, including enable mode commands. The
audit-trail command without this option enables audit trail for all commands
in configuration mode.
Usage Guidelines
By default, audit trail is enabled for all commands in configuration mode. Use the show audit-trail command
to display the content of the audit trail.
Example
The following command enables an audit trail:
(host) (config) #audit-trail
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers