Reference Guide

show wms counters
show wms counters [debug|event]
Description
Show WMS event and debug counters. If you omit the optional debug and events parameters, the show
wms counters command will display wms debug and events counters in a single table.
Syntax
Parameter Description
debug
Show show debug counters only
events
Show events counters only. If you omit the debug and events parameters, the
show wms counters will display debug and events counters in a single table.
Usage Guidelines
This command displays counters for database entries, messages and data structures. The counters displayed
will vary for each controller; if the controller does not have an entry for a particular counter type, it will not
appear in the output of this command
Example
This example shows part of the output of the command show wms counters.
(host) #show wms counters
Counters
--------
Name Value
---- -----
DB Reads 288268
DB Writes 350870
Probe Table DB Reads 2477
Probe Table DB Writes 952
AP Table DB Reads 143992
AP Table DB Writes 138867
STA Table DB Reads 40404
STA Table DB Writes 99687
Probe STA Table DB Reads 101352
Probe STA Table DB Writes 117566
Probe Register 2476
Probe State Update 37077
Set RAP Type 42552
Set RAP Type Conf Level 152
...
Command History
This command was introduced in ArubaOS 3.0
Dell Networking W-Series ArubaOS 6.4.x | User Guide show wms counters | 2128