Reference Guide

2091 | show wlan hotspot h2qp-wan-metrics-profile Dell Networking W-Series ArubaOS 6.4.x| User Guide
show wlan hotspot h2qp-wan-metrics-profile
show wlan hotspot h2qp-wan-metrics-profile [<profile-name>]
Description
The output of this command displays settings for a Hotspot 2.0 Query Protocol (H2QP) WAN metrics profile.
Syntax
Parameter Description
<profile>
Name of H2QP WAN metrics profile.
Usage Guidelines
The values configured in this profile can be sent in an ANQP IE to provide hotspot clients information about
access network characteristics such as link status and the capacity and speed of the WAN link to the
Internet.Issue this command without the <profile> parameter to display the entire WAN metrics profile list,
including profile status and the number of references to each profile. Include a profile name to display detailed
configuration information for that profile.
Examples
The example below shows that the controller has two configured WAN metrics profiles. The References
column lists the number of other profiles with references to the WAN metrics profile, and the Profile Status
column indicates whether the profile is predefined. User-defined profiles will not have an entry in the Profile
Status column.
(Host) (H2QP Connection Capability Profile "default") #show wlan hotspot h2qp-wan-metrics-
profile
H2QP WAN Metrics Profile List
-----------------------------
Name References Profile Status
---- ---------- --------------
default 0
fastwan 6
Total:2
The following example shows the current configuration settings for the profile fastwan.
(host) (config) #show wlan hotspot h2qp-wan-metrics-profile fastwan
H2QP WAN Metrics Profile "fastwan"
--------------------------------
Parameter Value
--------- -----
H2QP WAN metrics link status link_up
H2QP WAN metrics symmetric WAN link Disabled
H2QP WAN metrics link at capacity Disabled
WAN Metrics uplink speed 1000
WAN Metrics downlink speed 1000
WAN Metrics uplink load 100
WAN Metrics downlink load 100
WAN Metrics load measurement duration 100
The output of this command includes the following information: