Reference Guide

Parameter Description Range Default
l RemoteMgmt
l Sharing
l Chat
l googlecast
l allowall
l DLNA Media
l DLNA Print
static <mdns-record>
Configures static mDNS record. For
more information, see airgroup
static mdns-record on page 160
NOTE: This parameter is available
only in Config mode.
— —
vlan <NUMBER>
{allow|disallow}
Configures allowed/disallowed
VLAN ID.
NOTE: This parameter is available
only in Config mode.
1 —
4049
—
Usage Guidelines
Starting from ArubaOS 6.4, AirGroup is disabled by default. For the remaining global parameters, see the
command syntax.
Example
Access the controller’s command-line interface and use the following command to enable the AirGroup Global
Setting:
(host) #airgroup server-refresh <mac>
(host) #airgroup test-server <name> <macaddr>
(host) (config) #airgroup enable
(host) (config) #airgroup dlna enable
(host) (config) #airgroup mdns enable
(host) (config) #airgroup cppm-server enforce-registration
(host) (config) #airgroup query-interval 10
(host) (config) #airgroup location-discovery enable
(host) (config) #airgroup active-wireless-discovery enable
Use the following command to enable the allowall service:
(host) (config) #airgroup service allowall enable
Use the following command to enable AirGroup access to devices in a specific VLAN:
(host) (config) #airgroup vlan 5 disallow
Related Commands
Command Description
show airgroup This command displays AirGroup global settings, domain, active-domain,
and more AirGroup configuration information on the controller.
Dell Networking W-Series ArubaOS 6.4.x | User Guide airgroup | 156