Reference Guide

show firewall
show firewall
Description
Display a list of global firewall policies.
Syntax
No parameters
Example
This example below shows all firewall policies currently configured on the controller.
(host) (config) #show firewall
Global firewall policies
------------------------
Policy Action Rate Port
------ ------ ---- ----
Enforce TCP handshake before allowing data Disabled
Prohibit RST replay attack Disabled
Deny all IP fragments Disabled
Prohibit IP Spoofing Enabled
Monitor ping attack Disabled
Monitor TCP SYN attack Disabled
Monitor IP sessions attack Disabled
Deny inter user bridging Disabled
Log all received ICMP errors Disabled
Per-packet logging Disabled
Blacklist Grat ARP attack client Disabled
Stateful SIP Processing Enabled
Allow tri-session with DNAT Disabled
Disable FTP server No
Blacklist ARP attack client Disabled
Monitor ARP attack Disabled
Monitor Gratuitous ARP attack Enabled 50/sec
GRE call id processing Disabled
Session Idle Timeout Disabled
WMM content enforcement Disabled
Session VOIP Timeout Disabled
Stateful H.323 Processing Enabled
Stateful SCCP Processing Enabled
Only allow local subnets in user table Disabled
Monitor/police CP attacks Disabled
Rate limit CP untrusted ucast traffic Enabled 9765 pps
Rate limit CP untrusted mcast traffic Enabled 1953 pps
Rate limit CP trusted ucast traffic Enabled 65535 ps
Rate limit CP trusted mcast traffic Enabled 1953 pps
Rate limit CP route traffic Enabled 976 pps
Rate limit CP session mirror traffic Enabled 976 pps
Rate limit CP auth process traffic Enabled 976 pps
Deny inter user traffic Disabled
Prohibit ARP Spoofing Disabled
Stateful VOCERA Processing Enabled
Stateful UA Processing Enabled
Enforce bw contracts for broadcast traffic Disabled
Multicast automatic shaping Disabled
Stall Detection Enabled
Dell Networking W-Series ArubaOS 6.4.x | User Guide show firewall | 1476