Reference Guide

1347 | show app lync call-cdrs Dell Networking W-Series ArubaOS 6.4.x| User Guide
show app lync call-cdrs
show app lync prioritized-calls [all]
Description
This command displays the Call Detail Record (CDR) for prioritized Lync calls in the controller.
Syntax
Parameter Description
all
Displays CDR information for all Lync calls.
Example
In this example, the output is divided into multiple sections to better fit on the pages of this document. In the
actual command-line interface, it appears in a single, long table.
(host) #show app lync call-cdrs
Lync Session CDRs (Prioritized)
-------------------------------
CDR Id Client IP Client Name ALG Dir Called to Status
------ --------- ----------- --- --- --------- ------
4 192.0.2.10 6000 lync IC 6001 SUCC
3 192.0.2.20 6002 lync OG 6012 SUCC
Dur(sec) Orig time MOS Value Reason Codec Band
-------- --------- --------- ------ ----- ----
19 May 15 15:20:34 3.910000 Terminated G722 GREEN
85 May 15 15:16:30 3.910000 Terminated G722 GREEN
Setup Time(sec) Re-Assoc Initial-BSSID Initial-ESSID
--------------- -------- ------------- -------------
0 0 00:24:6c:27:5f:f0 test1
0 0 00:24:6c:27:5f:f0 test1
Initial-AP Name Call Type Src port Dest port DSCP WMM AC
--------------- --------- -------- --------- ---- ------
AP175 Voice 17120 31826 46 7
AP175 Voice 31826 17120 46 7
Num CDRS:2
The output of this command includes the following parameters:
Column Description
CDR Id
Displays the call detail record ID of a Lync call.
Client IP
Displays the IP address of the Lync client.
Client Name
Displays the user name of the Lync client.