Reference Guide

1297 | show ap spectrum device-history Dell Networking W-Series ArubaOS 6.4.x| User Guide
Video 4 5745312 6000 149 76 99
2010-05-16 20:32:44 2010-05-16 20:33:07
Video 5 5742031 6000 149 79 99
2010-05-16 20:33:43 2010-05-16 20:33:53
Video 6 5745312 6000 149 75 99
2010-05-16 20:34:08 2010-05-16 20:34:20
The output of this command includes the following information:
Column Description
Type Device type. This parameter can be any of the following:
l audio FF (fixed frequency)
l bluetooth
l cordless base FH (frequency hopper)
l cordless phone FF (fixed frequency
l cordless network FH (frequency hopper)
l generic FF (fixed frequency
l generic FH (frequency hopper)
l generic interferer
l microwave
l microwave inverter
l video
l xbox
NOTE: For additional details about non-Wi-Fi device types shown in this table, see
Non-Wi-Fi Interferers on page 1295
ID ID number assigned to the device by the spectrum monitor or hybrid AP radio.
Spectrum monitors and hybrid APs assign a unique spectrum ID per device type.
Cfreq Center frequency of the signal sent from the device.
Bandwidth Channel bandwidth used by the device, in Kilohertz.
Channels-affected Radio channels affected by the wireless device, in Kilohertz.
Signal-strength Strength of the signal sent from the device, in dBm.
Duty-cycle Device duty cycle. This value represents the percent of time the device broadcasts
on the specified channel or frequency.
Add-time Time at which the device was first detected.
Delete-time Time at which the device was aged out.