Reference Guide

TD: Time used by data frames (%); TM: time used by mgnt frames(%); time used by ctrl frames
(%)
Total Radios:6
The output of this command includes the following information:
Parameter Description
Name
Name of the AP.
Group
Group to which AP radio is assigned.
APType
APmodel.
IP Address
Radio IP address.
Band
Band on which radio is operating on (2.4 or 5 GHz).
Mode
Mode on which radio is operating; AP: AP Mode; AM: Air Monitor Mode, Spec-
trum: Spectrum Monitor Mode.
Optionally, you can also specify the channel number.
EIRP/MaxEIRP
Current EIRP output and maximum EIRP allowed for this radio (dBm).
NF/U/I
Noise Floor (dBm)/Utilization (%)/Interference (%).
TD
Time used by data frames (%).
TM
Time used by mgmt frames(%).
TC
Time used by ctrl frames (%).
Command History
Release Modification
ArubaOS 6.2 Command was introduced
ArubaOS 6.3 The ap-group parameter was introduced.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master
controllers
Dell Networking W-Series ArubaOS 6.4.x | User Guide show ap radio-summary | 1250