Reference Guide

1247 | show ap radio-database Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description
switch-ip
Sort the output of this command by controller ip address.
sort-direction
Select a sort direction for the output of this command.
ascending
Sort the output in ascending order.
descending
Sort the output in descending order.
start
Start displaying the output of this command at a chosen index number by
entering the index number of the AP at which command output should start.
switch <switch-ip-addr>
Display information for APs associated with a specific controller by entering
the IP address of that controller.
Example
The output of the command shows that the AP is aware of five other access points, three of which are active.
(host) #show ap radio-database
AP Radio Database
-----------------
Name Group AP Type IP Address Status Flags Switch IP 11g
Mode/Chan/EIRP/Cli 11a Mode/Chan/EIRP/Cli
---- ----- ------- ---------- ------ ----- --------- ----------
------------ ----------------------
mp3 default 125 10.3.129.96 Up 14h:45m:0s M 10.3.129.232 AP(HT)
/10/0/0 AP(HT)/100/4/0
sw-ad-ap124-11 default 124 10.3.129.99 Up 14h:43m:18s M 10.3.129.232 AP(HT)
/10/0/0 AP(HT)/100+/2/0
sw-ad-ap125-13 default 125 10.3.129.98 Up 14h:49m:36s M 10.3.129.232 AP(HT)
/10/2.5/0 AP(HT)/100/4/0
sw-ad-ap65-19 default 65 10.3.129.95 Down 10.3.129.232
Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed
R = Remote AP; I = Inactive; X = Maintenance Mode; P = PPPoE AP; B = Built-in AP
S = RFprotect Sensor; d = Disconnected Sensor; H = Using 802.11n license
M = Mesh node; Y = Mesh Recovery
The output of this command includes the following information:
Column Description
Name
Name of the AP.
Group
AP group to which the AP is associated.
AP Type
AP model type.
IP address
IP address of the AP.