Reference Guide

1203 | show ap mesh neighbors Dell Networking W-Series ArubaOS 6.4.x| User Guide
show ap mesh neighbors
show ap mesh neighbors {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-addr>} [names]
Description
Show all mesh neighbors for an AP.
Syntax
Parameter Description
ap-name<ap-name>
Show mesh neighbors for an AP with a specific name.
bssid <bssid>
Show mesh neighbors for a specific Basic Service Set Identifier (BSSID) on an
AP. The Basic Service Set Identifier (BSSID) is usually the AP’s MAC address.
ip-addr <ip-addr>
Show mesh neighbors for an AP with a specific IP address by entering its IP
address in dotted-decimal format.
names
If you include this optional parameter, the Portal column in the output of this
command will translate the BSSIDs of mesh parent and child APs to AP names
(where available).
Example
In the example below, the output has been split into two tables to better fit on the page. In the actual
command-line interface, the output appears in a single, wide table. The Flags column the output of this
command indicates the high-throughput (HT) properties of the mesh node. In the example below, the string
“HT-40MHzsgi-2ss” indicates that the node uses a 40MHz channel with a short guard interval (sgi) and sends 2
spatial streams (ss).
(host) #show ap mesh neighbors ap-name portal
Neighbor list
-------------
MAC Portal Channel Age Hops Cost Relation Flags RSSI
Rate Tx/Rx
--- ------ ------- --- ---- ---- -------- ----- ---- --
--------
00:0b:86:e8:09:d1 00:1a:1e:88:01:f0 157 0 1 11.00 C 3h:15m:42s - 65
54/54
00:1a:1e:88:02:91 00:1a:1e:88:01:f0 157 0 1 4.00 C 3h:35m:30s HL 59
300/300
00:0b:86:9b:27:78 Yes 157 0 0 12.00 N 3h:22m:46s - 26 -
00:0b:86:e8:09:d0 00:1a:1e:88:01:f0 157 0 1 11.00 N 3h:15m:36s - 65 -
00:1a:1e:88:02:90 00:1a:1e:88:01:f0 157+ 0 1 2.00 N 3h:35m:6s HL 59 -
A-Req A-Resp A-Fail HT-Details Cluster ID
----- ------ ------ ---------- ----------
1 1 0 Unsupported sw-ad-GB32
1 1 0 HT-40MHzsgi-2ss sw-ad-GB322
0 0 0 Unsupported mc1
0 0 0 Unsupported sw-ad-GB32