Reference Guide

896 | show ap system-profile Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Column Description
encryption is used for traffic to and from a wireless
client that is connected to a tunneled SSID. When
enabled, all traffic is re-encrypted in the IPsec
tunnel. When disabled, the wireless frame is only
encapsulated inside the IPsec tunnel.
Dump Server
(For debugging purposes.) Displays the server to
receive the core dump generated if an AP process
crashes.
Heartbeat DSCP
DSCP value of AP heartbeats (0-63).
Maintenance Mode
Shows if Maintenance mode is enabled or disabled.
If enabled, APs stop flooding unnecessary traps and
syslog messages to network management systems
or network operations centers when deploying,
maintaining, or upgrading the network. The
controller still generates debug syslog messages if
debug logging is enabled.
Maximum Request Retries
Maximum number of times to retry AP-generated
requests, including keepalive messages. After the
maximum number of retries, the AP either tries the
IP address specified by the bkup-lms-ip (if
configured) or reboots.
Request Retry Interval
Interval, in seconds, between the first and second
retries of AP-generated requests. If the configured
interval is less than 30 seconds, the interval for
subsequent retries is increased up to 30 seconds.
Number of IPSEC retries
The number of times the AP will attempt to recreate
an IPsec tunnel with the master controller before
the AP will reboot. A value of 0 disables the reboot.
Root AP
This parameter identifies the root AP in a hierarchy
of Remote APs.
AeroScout RTLS Server
IP address of an AeroScout real-time asset location
(RTLS) server.
RTLS Server configuration
This parameter contains the following information,
separated by colons.
l The IP address of the RTLS server to which the
AP sends RFID tag information.
l Number of the RTLS server port to which the AP
sends RFID tag information
l Shared secret key for the server
l Frequency at which packets are sent to the
server, in seconds
Telnet
Reports whether telnet access the AP is enabled or
disabled.