Reference Guide

Parameter Description
Tx HT 216 Mbps
Number of frames transmitted at 216 Mbps.
Tx HT 240 Mbps
Number of frames transmitted at 240 Mbps.
Tx HT 243 Mbps
Number of frames transmitted at 243 Mbps.
Tx HT 270 Mbps
Number of frames transmitted at 270 Mbps.
Tx HT 300 Mbps
Number of frames transmitted at 300 Mbps.
Tx WMM
Number of Wifi Multimedia (WMM) packets transmitted for the following access
categories. If the AP has not transmitted packets in a category type, this data row will not
appear in the output of the command.
Tx WMM [BE]: Best Effort
Tx WMM [BK]: Background
Tx WMM [VO]: VoIP
Tx WMM [VI]: Video
Number of Wifi Multimedia (WMM) VoIP packets transmitted.
UAPSD OverflowDrop
Number of packets dropped due to Unscheduled Automatic Power Save Delivery (U-APSD)
overflow.
Last SNR
The last recorded signal-to-noise ratio.
Last SNR CTL0
The signal-to-noise ratio for the last received data packet on the primary (control) channel
0. This parameter is only displayed for APs operating in 40 Mhz mode.
Last SNR CTL1
The signal-to-noise ratio for the last received data packet on the secondary (control)
channel 1. This parameter is only displayed for APs operating in 40 Mhz mode.
Last SNR CTL2
The signal-to-noise ratio for the last received data packet on the secondary (control)
channel 2. This parameter is only displayed for APs operating in 40 Mhz mode.
Last ACK SNR
Signal-to-noise ratio for the last received ACK packet.
Last ACK SNR CTL0
Signal-to-noise ratio for the last received ACK packet on the primary (control) channel 0.
This parameter is only displayed for APs operating in 40 Mhz mode.
Last ACK SNR CTL1
Signal-to-noise ratio for the last received ACK packet on the primary (control) channel 1.
This parameter is only displayed for APs operating in 40 Mhz mode.
Last ACK SNR CTL2
Signal-to-noise ratio for the last received ACK packet on the primary (control) channel 2.
This parameter is only displayed for APs operating in 40 Mhz mode.
Last ACK SNR EXT0
Signal-to-noise ratio for the last received ACK packet on the secondary (extension) channel
0. This parameter is only displayed for APs operating in 40 Mhz mode.
Last ACK SNR EXT1
Signal-to-noise ratio for the last received ACK packet on the secondary (extension) channel
1. This parameter is only displayed for APs operating in 40 Mhz mode.
Last ACK SNR EXT2
Signal-to-noise ratio for the last received ACK packet on the secondary (extension) channel
2. This parameter is only displayed for APs operating in 40 Mhz mode.
Frames Received
Number of frames received.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ap debug bss-stats | 719