Users Guide

22 | VIA Configuration Dell PowerConnect W-VIA 2.0 | User Guide
Rebranding VIA and Uploading VIA Installers
You can rebrand the VIA client and the VIA download page with your custom logo and HTML page. Additionaly
you can now upload latest versions of VIA installers.
Figure 10 Customize VIA logo, Landing Page, and Upload VIA Installer
Download VIA Installer and Version File
To download the VIA installer and version file:
1. Navigate to Configuration > Advanced Services > VPN Services > VIA tab.
2. Under VIA installers for various platforms section, click the installer file to download the installation file.
Upload VIA Installer
To upload a new VIA installer:
1. Navigate to Configuration > Advanced Services > VPN Services > VIA tab.
2. Under Upload new VIA Installers, browse and select the installer from your computer. Click the Upload
button to upload the installer to the controller.
Customize Logo
To use a custom logo on the VIA download page and on the VIA client:
1. Navigate to Configuration > Advanced Services > VPN Services > VIA tab.
2. Under the Customize Logo section, browse and select a logo from your computer. Click the Upload button to
upload the image to the controller.
EAP-PEAP: Connect only
to these servers
Comma separated list of servers.
Enable IEEE 802.1x
authentication for this
network
Select this option to enable 802.1x authentication for this network.
Default: Enabled.
EAP-Certificate: Connect
only to these certificates
Comma separated list of servers.
Inner EAP-Certificate:
Connect only to these
servers
Comma separated list of servers.
Connect even if this
WLAN is not
broadcasting
Default: Disabled
Table 7 Configure VIA client WLAN profile
Option Description