Users Guide

753 | Remote Access Points Dell Networking W-Series ArubaOS 6.4.x| User Guide
In the WebUI
1. Navigate to the Security > Authentication > AAA Profiles page. From the AAA Profiles Summary list, click
Add.
2. Enter the AAA profile name, then click Add.
3. Select the AAA profile that you just created.
a. For 802.1X Authentication Default Role, select the user role you previously configured for split
tunneling, then click Apply.
b. Under the AAA profile that you created, locate 802.1x Authentication Server Group, and select the
authentication server group to use, then click Apply.
4. (Optional) To enable RADIUS accounting:
a. Select the AAA profile from the profile list to display the list of authentication and accounting profiles
associated with the AAA profile.
b. Select the Radius Accounting Server Group profile associated with the AAA profile. Click the RADIUS
Accounting Server Group drop-down list to select a RADIUS server group. (For more information on
configuring a RADIUS server or server group, see Configuring a RADIUS Server on page 250.)
c. To enable RADIUS Interim Accounting, select the AAA profile name from the profile list, then click the
RADIUS Interim Accounting checkbox. This option is disabled by default, allowing the controller to
send only start and stop messages to the RADIUS accounting server.
5. Click Apply.
If you need to create an authentication server group, select new and enter the appropriate parameters.
In the CLI
(host) (config) #aaa profile <name>
authentication-dot1x <dot1x-profile>
dot1x-default-role <role>
dot1x-server-group <group>
radius-accounting <group>
radius-interim-accounting
Configuring the Virtual AP Profile
In the WebUI
1. Navigate to Configuration > Wireless > AP Configuration page. Select either the AP Group or AP
Specific tab. Click Edit for the applicable AP group name or AP name.
2. Under Profiles, select Wireless LAN, then Virtual AP.
3. To create a new virtual AP profile in the WebUI, select New from the Add a profile drop-down menu. Enter
the name for the virtual AP profile, and click Add.
Whenever you create a new virtual AP profile in the WebUI, the profile automatically contains the “default” SSID
profile with the default ESSID. You must configure a new ESSID and SSID profile for the virtual AP profile before you
apply the profile.
a. In the Profile Details entry, go to the AAA Profile drop-down list and select the previously configured
AAA profile. The AAA Profile pop-up window appears.
b. To set the AAA profile and close the window, click Apply.
c. In the Profile Details entry for the new virtual AP profile, select NEW from the SSID Profile drop-down
menu. A pop-up window displays to allow you to configure the SSID profile.
d. Enter the name for the SSID profile.
e. Under Network, enter a name in the Network Name (SSID) field.