Users Guide

Figure 87 Example Configuration: Campus-Wide
This example uses the “default” mobility domain for the campus-wide roaming area. Since all controllers are
initially included in the default mobility domain, you do not need to explicitly configure “default” as the active
domain on each controller.
In the WebUI
On controller A (the master controller):
1. Navigate to the Configuration > Advanced Services > IP Mobility page.
2. Select the Enable IP Mobility checkbox.
3. Select the default domain in the Mobility Domain list.
4. Click Add.
5. Enter the home agent IP address, and a description for the first entry and click Add. Repeat this step for
each HAT entry.
6. Click Apply.
Home Agent Address or VRIP
10.1.1.245
10.2.1.245
10.3.1.245
10.4.1.245
Table 138: Example entries
On controllers B and C:
1. Navigate to the Configuration > Advanced Services > IP Mobility page.
2. Select the Enable IP Mobility checkbox.
3. Click Apply.
Dell Networking W-Series ArubaOS 6.4.x | User Guide IP Mobility |
693