Users Guide

cluster corporate
opmode wpa2-psk-aes
wpa-passphrase mesh_123
rf-band a
You can also create a new mesh radio profile by copying the settings of an existing profile using the clone
parameter. Using the clone command to create a new profile makes it easier to keep constant attributes in
common within multiple profiles.
(host)(config) #ap mesh-cluster-profile <profile-name> clone <source-profile-name>
Viewing Mesh Cluster Profile Settings
To view a complete list of mesh cluster profiles and their status:
(host)(config) #show ap mesh-cluster-profile
To view the settings of a specific mesh cluster profile:
(host)(config) #show ap mesh-cluster-profile <profile-name>
Associating Mesh Cluster Profiles
The following commands associate a mesh cluster profile to an AP group or an individual AP. For deployments
with multiple mesh clusters, you must also configure the profile’s priority. Remember, the lower the priority
number, the high the priority. The mesh cluster priority determines the order by which the mesh cluster
profiles are used. This allows you, rather than the link metric algorithm, to control the network topology by
defining the cluster profiles to use if one becomes unavailable.
To associate a mesh cluster profile to an AP group in a single-cluster deployment:
(host)(config) #ap-group <group> mesh-cluster-profile <profile-name>
To associate a mesh cluster profile to an individual AP in a single-cluster deployment:
(host)(config) #ap-name <name>mesh-cluster-profile <profile-name>
To associate a mesh cluster profile to an AP group in a multiple-cluster deployment:
(host)(config) #ap-group <group> mesh-cluster-profile <profile-name> priority <priority>
To associate a mesh cluster profile to an individual AP in a multiple-cluster deployment, use the command
(host)(config) #ap-name <name>
mesh-cluster-profile <profile-name> priority <priority>
Example:
(host)(config) #ap-group group1
mesh-cluster-profile cluster1 priority 5
mesh-cluster-profile cluster2 priority 10
(host)(config) #ap-group2
mesh-cluster-profile cluster1 priority 10
mesh-cluster-profile cluster2 priority 5
mesh-radio-profile channel2
Excluding a Mesh Cluster Profile from a Mesh Node
To exclude a specific mesh cluster profile from an AP:
(host)(config) #ap-name <name> exclude-mesh-cluster-profile-ap <profile-name>
Deleting a Mesh Cluster Profile
If no APs are using a mesh cluster profile, you can delete that profile using the no parameter:
(host)(config) #no ap mesh-cluster-profile <profile-name>
Dell Networking W-Series ArubaOS 6.4.x | User Guide Secure Enterprise Mesh |
640