Users Guide

arm-profile
beacon-period
beacon-regulate
cap-reg-eirp
channel <num|num+|num->
channel-reuse
channel-reuse-threshold
clone
csa
csa-count
disable-arm-wids-function
dot11b-protection (for 802.11g radio profiles only)
dot11h
high-throughput-enable
ht-radio-profile
interference-immunity
maximum-distance
mgmt-frame-throttle-interval
mgmt-frame-throttle-limit
mode {ap-mode|am-mode|spectrum-mode}
no
radio-enable
slb-mode
slb-threshold
slb-update-interval
spectrum-load-bal-domain
spectrum-load-balancing
spectrum-monitoring
spectrum-profile
tpc-power
tx-power
You can also create a new 802.11a or 802.11g RF management profile by copying the settings of an existing
profile using the clone parameter. Using the clone command to create a new profile makes it easier to keep
constant attributes in common within multiple profiles.
rf dot11a-radio-profile <profile-name> clone <source-profile-name>
rf dot11g-radio-profile <profile-name>clone <source-profile-name>
Viewing RF Management Settings
To view a complete list of 802.11a or 802.11g RF management profiles and their status:
show rf dot11a-radio-profile|dot11g-radio-profile
To view the settings of a specific RF management profile:
show rf dot11a-radio-profile|dot11g-radio-profile <profile-name>
Assigning a 802.11a/802.11g Profile
To assign an 802.11a or 802.11g RF management profile to an AP group:
ap-group <group> dot11a-radio-profile <profile-name>
-or-
ap-group <group> dot11g-radio-profile <profile-name>
To assign an 802.11a or 802.11g RF management profile to an individual AP:
ap-name <name> dot11a-radio-profile <profile-name>
-or-
ap-name <name> dot11g-radio-profile <profile-name>
Dell Networking W-Series ArubaOS 6.4.x | User Guide Access Points |
602