Reference Guide

862 | show esi parser Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
show esi parser
show esi parser domains|rules|stats
Description
Show ESI parser information.
Syntax
Usage Guidelines
The ESI parser is a generic syslog parser on the controller that accepts syslog messages from external third-party
appliances such as anti-virus gateways, content filters, and intrusion detection systems. It processes syslog
messages according to user-defined rules and takes configurable actions on the corresponding system users.
ESI servers are configured into domains to which ESI syslog parser rules are applied.
Use the show esi parser domains command to show ESI parser domain information.
Example
The ESI Parser Domain Table in the example below shows that the controller has two ESI domains and two ESI
servers.
Related Commands
Command History
This command was introduced in ArubaOS 3.1.
Parameter Description
domains Show ESI parser domain information.
rules Show ESI parser rule information.
stats Show ESI parser rule stats.
Platforms Licensing Command Mode
esi parser domain This command configures an ESI syslog
parser domain.
Config mode on master or local controllers.
esi parser rule This command creates or changes an ESI
syslog parser rule.
Config mode on master or local controllers.
esi parser rule-test This command allows you to test all of the
enabled parser rules.
Config mode on master or local controllers.
(host) #show esi parser domains
ESI Parser Domain Table
-----------------------
Domain ESI Servers Peer Controllers
------ ----------- ----------------
corp_domain 172.21.5.50 10.3.132.14
remote_domain 192.84.66.30
Total number of servers configured: 2