Reference Guide

Table Of Contents
Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show configuration | 807
show configuration
show configuration
Description
Show the saved configuration on the controller.
Syntax
No parameters.
Usage Guidelines
Issue this command to view the entire configuration saved on the controller, including all profiles, ACLs, and
interface settings.
Example
The example below shows part of the output for this command.
Command History
This command was available in ArubaOS 1.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or local
controllers
(host) # show configuration
version 3.4
enable secret "0078b61601db950378d3d27a33c0b4d61f95b653ce9480a229"
telnet cli
prompt Lab12-800
loginsession timeout 0
hostname "sampleHost"
clock timezone PST -8
banner motd:
This controller is in Lab 12.
location "Building1.floor1"
mms config 0
controller config 1173
ip access-list eth 200