Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show ap spectrum client-list | 747
show ap spectrum client-list
show ap spectrum client-list {ap-name <ap-name>}|{ip-addr <ip-addr>}
ap-bssid <bssid>
channel <channel>
essid <essid>
limit <limit>
mac <mac-addr>
or
page <page>
freq-band 2.4ghz|5ghz
start <start>
Description
This command shows details for clients seen by a specified spectrum monitor.
Syntax
Usage Guidelines
Use this command to view channel and signal information for wireless clients seen by the spectrum monitor.
Parameter Description
ap-name <ap-name> Name of the spectrum monitor for which you want to view spectrum information.
ip-addr <ip-addr> IP address of the spectrum monitor for which you want to view spectrum information.
ap-bssid <bssid> View information for a client with a specific BSSID.
channel <channel> view information for clients on a specific radio channel.
essid <essid> View information for clients using a specific ESSID.
limit <limit> Limit the output of this command to the specified number of clients.
mac <mac-addr> View information for a client with a specific MAC address.
start <start> Limit the output of this command to clients that with the specified index number or lower.
limit <number> Limit the displayed output to the specified number of entries
or Use this parameter to display information that meets either or two criteria, such as a specified
ESSID or channel.
page <number> Enter a number from 10-100 (inclusive) to specify the number of entries that should appear in
each page of the output for this command. For example, if the output of this command has 100
entries and you select a page value of 20, the output will appear in 5 pages each with 20
entries. If you selected a page value of 10, the output would appear in 10 pages with 10 entries.
freq-band 2.4ghz|5ghz View information for a specific radio type, either 2.4 GHz or 5 GHz.