Reference Guide

734 | show ap remote counters Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
show ap remote counters
show ap remote counters {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-addr>}
Description
Show the numbers of message counters for Remote APs
Syntax
Examples
Use this command to determine the number of message counters recorded for each counter type seen by the
remote AP. The output of the command in the example below shows counters for Remote AP State and VoIP
CAC State Announcements.
The output of this command includes the following information:
Command History
Introduced in ArubaOS 3.0.
Command Information
Parameter Description
ap-name <ap-name> Show data for an AP with a specific name.
bssid <bssid> Show data for a specific Basic Service Set Identifier (BSSID) on an AP. You must specify an
AP’s BSSID, which is usually the AP’s MAC address
ip-addr <ip-addr> Show data for an AP with a specific IP address.
Column Description
Name Name of the counter type.
Value Number of counters recorded since the AP was last reset.
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers
(host) #show ap remote counters ap-name al22
Counters
--------
Name Value
---- -----
Remote AP State 62851
VoIP CAC State Announcement 13605