Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show ap provisioning | 729
Command History
Command Information
Antenna bearing for
802.11g
Horizontal coverage distance of the 802.11g (2.4GHz) antenna from true north, from 0-360
degrees.
NOTE: This parameter is supported on outdoor APs only. The horizontal coverage pattern does
not consider the elevation or vertical antenna pattern.
Antenna tilt angle
for 802.11a
The angle of the 802.11a (5GHz) antenna. This parameter can range from between -90 degrees
and 0 degrees for downtilt, and between +90 degrees and 0 degrees for uptilt.
Antenna tilt angle
for 802.11g
The angle of the 802.11g (2.4GHz) antenna. This parameter can range from between -90
degrees and 0 degrees for downtilt, and between +90 degrees and 0 degrees for uptilt.
Mesh SAE Shows if the AP has enabled or disabled Secure Attribute Exchange (SAE) on a mesh network.
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 3.2 Introduced support for mesh parameters, additional antenna parameters, and AP location
parameters.
ArubaOS 3.4 Introduced support for the following parameters:
 Installation
 Mesh SAE
 USB User Name
 USB Password
 USB Device Type
 USB Device Identifier
 USB Dial String
 USB Initialization String
 USB TTY device path
ArubaOS 5.0 The mesh-sae parameter no longer displays the sae-default setting if the parameter is
disabled. Only the sae-disable option indicates that this parameter is currently in its default
disabled state.
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers
Column Description