Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show ap mesh debug hostapd-log | 693
show ap mesh debug hostapd-log
show ap mesh debug hostapd-log {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-addr>}
Description
Show the debug log messages for the hostapd process.
Syntax
Usage Guidelines
This is an internal technical support command. Dell technical support may request that you issue this command
to help analyze and troubleshoot problems with the hostapd process or your mesh network.
Command History
Introduced in ArubaOS 3.0.
Command Information
Parameter Description
ap-name <ap-name> Show data for an AP with a specific name.
bssid <bssid> Show data for a specific Basic Service Set Identifier (BSSID) on an AP. The Basic Service Set
Identifier (BSSID) is usually the AP’s MAC address.
ip-addr <ip-addr> Show data for an AP with a specific IP address by entering an IP address in dotted-decimal
format.
Platforms Licensing Command Mode
All platforms This show command is available in the
base operating system. Commands to
configure the mesh feature require the
Mesh license.
Enable or Config mode on master controllers