Reference Guide

486 | rf spectrum-profile Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
rf spectrum-profile
rf spectrum-profile <profile-name>
age-out audio|bluetooth|cordless-ff-phone|cordless-fh-base|cordless-fh-
network|generic-ff|generic-fh|microwave|microwave-inverter|unknown|video|wifi|xbox
clone <source>
no
spectrum-band 2ghz|5ghz-lower|5ghz-middle|5ghz-upper
Description
Define the spectrum band and device ageout times used by a spectrum monitor, or a hybrid AP radio on a AP-130
Series AP.
Syntax
This command includes the following configuration parameters.
Parameter Description Range Default
age-out Use the age-out parameter to define the number of
seconds for which a specific device type must stop
sending a signal before the spectrum monitor considers
that device no longer active on the network.
audio Audio devices. 5-65535 seconds 10 sec
bluetooth Bluetooth devices. Note that this setting is applicable to
2.4GHz spectrum monitor radios only.
5-65535 seconds 25 sec
cordless-ff-phone Cordless phone fixed frequency devices. 5-65535 seconds 10 sec
cordless-fh-base Cordless base frequency hopper devices. 5-65535 seconds 25 sec
cordless-fh-network Cordless network frequency hopper devices. 5-65535 seconds 25 sec
generic-ff Generic fixed frequency devices. 5-65535 seconds 10 sec
generic-fh Generic frequency hopper devices. 5-65535 seconds 25 sec
generic-interferer Unknown device type. 5-65535 seconds 25 sec
microwave Microwaves. Note that this setting is applicable to
2.4GHz spectrum monitor radios only.
5-65535 seconds 15 sec
microwave-inverter Inverter-type microwaves. Note that this setting is
applicable to 2.4GHz spectrum monitor radios only.
5-65535 seconds 15 sec
video Video devices. 5-65535 seconds 10 sec
wifi WIFI devices. 5-65535 seconds
xbox Xbox consoles. Note that this setting is applicable to
2.4GHz spectrum monitor radios only.
5-65535 seconds 600 sec
clone <source> Make a copy of an existing spectrum profile. 600 sec
no Remove a spectrum profile or negate a configured
parameter.